Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Inspection Across Vallejo
A chimney inspection in Vallejo typically costs $189 – $449 depending on the level, with most Level 1 inspections running $189 – $249 and Level 2 inspections with camera work running $349 – $449. Our Chimney Inspection team serves every Vallejo neighborhood, from the Victorians near downtown to the ranchers up in the hills off Columbus Parkway. Call (831) 534-3789 and you’ll get a live person, a written price before any work starts, and a technician whose name and photo you’ll see before they knock.
Why Alcott Chimney San Francisco Is Vallejo’s Preferred Chimney Inspection Company
Ruben Castellano has built Alcott Chimney San Francisco around a simple idea: you should know exactly who’s coming to your home before that person steps onto your porch. Every technician who serves Vallejo is background-checked and identity-verified under the Threshold Standard, then announced to you by name and photo ahead of the visit. They show a photo ID badge at the door. No exceptions. For a homeowner who’s often alone, or a parent with kids underfoot, that detail matters more than any slogan.
Since 2002, we’ve worked on Vallejo’s distinctive housing stock: ornate early-1900s Victorians with original brick chimneys, mid-century ranchers with unlined masonry flues, and hillside homes where bay wind drives salt spray against exposed caps and flashing. We know what fails first out here because we’ve seen it hundreds of times. That local experience means we don’t recommend work you don’t need, and we back every repair with a written guarantee. If a repair fails within the coverage period, the second visit is free. That’s the 365-Day Done Right Promise in writing.
Scheduling from our Bay Area office, we route crews to Vallejo daily. When you call (831) 534-3789, a live person answers, no voicemail queue, even if it’s 11 p.m. and something smells like smoke.
Styles & brands we work with





Chimney Fire in Vallejo
A Chimney Fire inspection in Vallejo is what we do after a homeowner has heard a roar, seen flames from the top of the chimney, or found creosote debris on the roof and realizes something burned inside the flue. The salt air off San Pablo Bay complicates these calls because corroded caps and deteriorated flashing let moisture into the flue between fires, which means we’re often assessing both fire damage and corrosion damage in the same inspection.
What we check after a burn
We run a camera through the full flue length looking for cracked clay tiles, warped stainless liners, and creosote that has turned to a hard glaze. In Vallejo’s older ranchers with unlined masonry chimneys, fire can cause hidden spalling behind the damper, something only a camera inspection reliably catches.
What it costs
After a chimney fire, a Level 2 inspection in Vallejo runs $349 – $449. That includes the camera work, a written report, and photos you can see. If damage is found, you get a written repair quote before anything else happens.
Level 2 Chimney Inspection in Vallejo
A Level 2 Chimney Inspection in Vallejo uses a video camera to inspect the entire flue interior, the smoke chamber, the damper assembly, and the exterior cap and crown, and it’s what we recommend any time a home changes hands, a chimney has survived a fire, an earthquake has rattled the area, or an older flue hasn’t been looked at in years. Vallejo’s housing stock makes this especially relevant: many homes built from the 1920s through the 1960s still have original clay tile liners or no liner at all.
Why camera work matters here
Fog-cooled evenings and winter chill push Vallejo homeowners toward regular fires, and repeated heating cycles put stress on aging mortar joints. A camera reveals what a flashlight never will: hairline cracks, gaps between tiles, and creosote accumulation inside the flue that signals a fire risk.
What to expect on the day
We schedule most Vallejo Level 2 inspections within a few days, run the camera top-down and bottom-up, and hand you photos before we leave. You get a written report that plain-English explains exactly what we saw and whether anything needs attention now or can wait.
Trusted Brands We Service in Vallejo
We install and service professional trade materials the same way other local companies talk about them: by name. When we replace a corroded cap on a Vallejo hillside home, we’re putting on a stainless Famco cap, not a galvanized box-store substitute. When flashing needs re-work at the roofline, we use Copperfield materials specified for coastal exposure. Our trucks carry Gelco and Olympia Chimney components regularly ordered for Vallejo jobs, which means faster turnaround when an inspection turns up something that needs fixing. You’ll know the brand name before we install it, and that name goes on your written quote.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Inspection Problems We See in Vallejo Homes
- Corroded galvanized caps. San Pablo Bay’s salty air pits galvanized steel quickly, and once rust streaks stain the masonry, the cap is usually near failure. Stainless replacement caps last far longer out here and cost $150 – $300 installed.
- Leaking flashing at the roofline. Salt pitting lets water behind the flashing, which rots the roof deck and shows up as stains on ceilings below. We find this often on Vallejo’s 1950s and 60s ranchers with original flashing.
- First-degree creosote in unlined flues. Fog-cooled evenings invite more fires, and in original masonry chimneys without liners, that creosote builds fast. It’s the tar-like buildup that causes chimney fires, and it’s one of the most common findings on older Vallejo homes.
- Hidden spalling behind the damper. Humidity off the bay accelerates moisture damage inside brick flues. By the time you see spalling from the firebox, it’s usually been happening behind the damper for a while, which is exactly why we camera-inspect that area on every Level 2.
Pricing for Chimney Inspection in Vallejo, CA
A standard Level 1 inspection in Vallejo runs $189 – $249. That covers a visual check of the firebox, damper, and accessible flue, plus a basic exterior look at the cap and crown. A Level 2 inspection with full camera work runs $349 – $449. Level 3 inspections, which involve removing part of the chimney structure to access hidden areas, typically start around $1,200 and are quoted case-by-case. What changes your price in Vallejo: roof pitch, flue height, access to the cap from a ladder, and whether we’re working on a hillside property off Sonoma Boulevard or a flat-lot rancher near Tennessee Street. Every quote is written before work starts. Call (831) 534-3789 for a free estimate on your exact chimney.
We Also Serve Cities Near Vallejo
Alcott Chimney San Francisco provides Chimney Inspection in Vallejo and the surrounding Bay Area communities. If you’re across the Carquinez Bridge in Richmond, up the 101 in Novato or San Rafael, or just south in Albany, our crews cover those areas too. Same background-checked technicians, same written pricing, same 365-day guarantee.
Serving Vallejo, CA - Our Local Coverage Area
We’re based in the Vallejo area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Inspection in Vallejo
Every 6 to 12 months if your chimney is directly exposed to San Pablo Bay wind and you burn regularly. Homes further inland or with minimal fireplace use can often go 12 to 24 months between Level 2 inspections. Salt corrosion moves faster than most homeowners expect, and catching a pitted cap or failing flashing early costs a few hundred dollars instead of a full rebuild.
The galvanized cap, the flashing at the roofline, and the crown mortar are the first to go. Galvanic corrosion where dissimilar metals meet accelerates the damage. Stainless components like Famco caps resist this far better than galvanized, which is why we recommend stainless for any coastal Vallejo replacement. Call (831) 534-3789 and we’ll tell you what your chimney is wearing right now.
Yes, a Level 2 camera inspection can see spalling behind the damper, which is where bay humidity and salt air do their most hidden damage. This damage is invisible from the firebox and typically can’t be caught with a basic visual check. If your Vallejo home has an original brick flue, it’s worth scheduling a camera inspection once a year.
We check for cracked clay tiles, warped liners, glazed creosote, and heat damage to the smoke chamber and damper. In Vallejo’s 1940s to 1960s ranchers with unlined masonry flues, the risk profile is different than newer homes, so we inspect with the assumption that the flue has been heating and cooling far beyond its original design. A post-fire inspection runs $349 – $449 and includes a written report with photos.
Yes. Fog and humidity add moisture inside the flue, which causes creosote to become stickier and accumulate faster, especially in unlined masonry chimneys. That heavier buildup is a chimney fire risk. Regular sweeping and an annual inspection are the most direct way to keep it under control. Call (831) 534-3789 for an exact quote, estimates are free.
Call (831) 534-3789 to schedule your chimney inspection in Vallejo. You’ll know your technician’s name and see their photo before we arrive, get a written price before any work begins, and every repair is backed by a written 365-day guarantee. If the repair fails, the second visit is free.
Written by Ruben Castellano, Owner at Alcott Chimney San Francisco, serving Vallejo since 2002.